A Practical Guide

No matter how advanced your 3D printer is, occasional print failures are inevitable. At BritForge3D, we know how frustrating it can be when a print goes wrong especially after hours of waiting. Whether you’re facing warping, stringing, layer shifts, or adhesion problems, this guide will help you identify and fix the most common issues.

1. Warping: Corners Peeling Off the Bed

Symptoms: The base corners of your print curl up and detach from the bed. Cause: Uneven cooling, poor bed adhesion, or lack of bed heat. Fix: Ensure your heated bed is at the correct temperature, clean the build surface thoroughly, and consider using a brim or raft. Materials like ABS are more prone to warping switch to PLA or use an enclosure if needed.

2. Layer Shifting

Symptoms: The layers appear offset or misaligned during the print. Cause: Loose belts, obstructed axis movement, or overheating stepper motors. Fix: Check that X and Y belts are tight and secure. Make sure your printer’s movement is smooth and unobstructed. If it continues, reduce print speed or enable stepper driver cooling.

3. Stringing (Hairy Prints)

Symptoms: Thin strands of filament appear between parts of the model. Cause: Retraction settings are incorrect or nozzle temperature is too high. Fix: Increase retraction distance and speed in your slicer. Lower the nozzle temperature slightly and enable combing or coasting features.

4. Poor First Layer Adhesion

Symptoms: The first layer doesn’t stick to the bed, leading to print failure. Cause: Bed not level, nozzle too far from bed, or greasy print surface. Fix: Relevel the bed manually or using auto bed leveling. Clean your bed with isopropyl alcohol. Add a skirt or brim in the slicer for extra grip.

5. Under-Extrusion

Symptoms: Gaps in layers, weak walls, or missing print segments. Cause: Clogged nozzle, incorrect extrusion multiplier, or inconsistent filament diameter. Fix: Clean or replace the nozzle, verify filament diameter in the slicer, and calibrate the extruder steps/mm. Use higher-quality filament to prevent inconsistencies.

6. Over-Extrusion

Symptoms: Bulging prints, excess filament, stringing. Cause: Extrusion multiplier set too high or filament not measured correctly. Fix: Lower the extrusion flow rate (usually around 95–100% is ideal). Check filament diameter using calipers and update slicer settings accordingly.

7. Zits and Blobs

Symptoms: Small imperfections or bumps on the outer surface of your prints. Cause: Inconsistent retractions, poorly timed layer changes, or extruder pressure build-up. Fix: Enable “coasting” or “wipe nozzle” options in your slicer. Adjust retraction settings and experiment with “Z-seam alignment” to move start points to less visible areas.

8. Ghosting (Ringing or Echoing)

Symptoms: Echo-like lines appear after sharp corners or features. Cause: Mechanical vibrations or too high print speed. Fix: Reduce print speed and acceleration settings. Ensure your printer is on a solid surface and that belts are tensioned correctly.

9. Brittle or Snapping Filament

Symptoms: Filament breaks before reaching the extruder or while spooling. Cause: Moisture absorption or old filament. Fix: Store filament in a dry box or sealed container with silica gel. For best results, dry it before printing — especially for hygroscopic materials like Nylon or PETG.

10. Still Stuck? Let BritForge3D Help

If you’re troubleshooting a stubborn issue and just can’t find the fix, our team at BritForge3D can help. We’ve handled thousands of prints and know how to diagnose even the trickiest failures. Feel free to contact us or upload your file — we’ll offer guidance or even handle the print professionally for you.

Conclusion

3D printing isn’t just about the machine or the model it’s about understanding the entire process. These common issues are a normal part of the learning curve. With experience (and a little help from BritForge3D, you’ll be producing reliable, high-quality prints in no time. Stay curious, keep experimenting, and don’t let a failed print stop your progress!